APT BLK 81, BEDOK NORTH ROAD #9-298 SINGAPORE 460081 sales1@eeept.com
+65 6444 1765


E Power Controller


The E Power Controller uses the newest technologies and innovations to manage your process and reduce your energy costs. On every level it brings you the flexibility you need to best meet your requirements now and in the future.

  • Modular Design
  • Software Configurable
  • QuickStart Easu Setup
  • Advanced Configuration using Graphical Wiring Editor
  • Predictive Load Management
  • Flexible Communications

Let us look after your power control for you and give you the peace of mind that you have the best for your process – even as it changes.

  • Flexibility – advanced technologies in harmony with modularity and ease of use to deliver your power control needs
  • Efficiency – world class power control with innovative features to minimise your energy costs with exceptional process performance
  • Peace of mind – a power controller that will bring you return on investment and can be adapted in the future if your requirements change – one product for all solutions



TE200A – Two leg, three phase, burst firing Power Controller

  • Ergonomic design
  • Analog input configured as voltage, current or potentiometer
  • Burst firing or single cycle firing modes
  • Input current 4 -20mA
  • Input voltage 0 – 5V dc, 0 – 10V dc
  • Nominal current per phase 16 – 63A at 45  ̊ C

7200A – Two leg, three phase Power Controller

  • Current range from 16 to 200A at 45  ̊C
  • Voltage upto 500V
  • Input Current 0 – 20mA or 4 – 20mA
  • Input Voltage 0 – 5V or 0 – 10V
  • Firing modes: Burst, single cycle
  • Thyristor short circuit alarm
  • Load open circuit alarm
  • Partial load failure detection
  • Thyristor over – temperature alarm


7100L – Single Phase Solid State Contactor

  • Current range: 16 – 100A at 45  ̊C
  • Voltage upto 500V
  • Simple installation and maintenance
  • Optimized design for reduced size
  • Protected against transients
  • Fast cycle times give increase heater file
  • High reliability with no mechanical contacts


TE10S – Single Phase Solid State Relay

  • Compact, low cost 240V and 480V SSR
  • 16, 25, 40 amd 50A rated at 45  ̊C
  • AC and DC logic input
  • Partial load failure detection
  • Simple installation and maintenance


TE200S Two Leg, Three Phase Solid State Relay

  • Ergonomic design
  • DC or AC logic input signal
  • Firing mode: Logic ON/OFF, zero crossing firing with LED indication
  • Nominal current per phase – 16-63A at 45  ̊C
  • Supply Voltage 200Vac to 500Vac


7200S Two Leg, Three Phase Solid State Relay

  • Current range from 26 to 200A at 45  ̊C
  • Voltage upto 500V
  • Logic inputs (AC or DC)
  • 4-20mA analog input which gives time proportional output
  • Suitable for resistive loads
  • Over-temperature shutdown for fan cooled units
  • Thyristor short circuit alarm
  • Over-temperature alarm
  • Diagnostic Load Fault detection (DLF)


7300S Three Phase Solid State Relays

  • Current range from 16 to 160amps at 45  ̊C
  • Voltage upto 500V
  • Inputs: Logic (AC or DC) or Analogue 4-20mA which gives time proportional output
  • Suitable for SWIR or resistive loads
  • Over-temperature shutdown for fan cooled units (over 100A)
  • Thyristor short circuit alarm
  • Over-temperature alarm
  • Diagnostic load failure detection



analog controller

7100A - Single Phase Power Controller

  • 16 to 250A at 45  ̊C
  • Upto 500V
  • Input Current: 0 - 20mA or 4 – 20mA
  • Input Voltage: 0 – 5V or 0 – 10V


Two leg, three phase Power Controller - 7200A

  • Current range from 16 to 200A at 45°C
  • Voltage up to 500V
  • Input current 0-20mA or 4-20mA
  • Input voltage 0-5V or 0-10V
  • Firing modes: Burst, single cycle
  • Thyristor short circuit alarm
  • Load open circuit alarm


Three Phase Power Controller - 7300A

  • Current range from 16 to 160A at 45°C
  • Voltage up to 500V
  • Input current: 0-20mA or 4-20mA
  • Input voltage: 0-5V or 0-10V


Three phase, burst firing power controller - TE300

  • Ergonomic design
  • Burst firing, single cycle and advanced single cycle firing modes
  • Nominal current per phase 16 to 63A at 45°C
  • Voltage up to 500V

The TE300 is designed for general purpose three phase applications where a resistive load or infrared heaters are involved.

The TE300 is controlled by an analog signal which is selectable for DC current or voltage.  A 5V user voltage enables local control by a potentiometer.  The unit can be used to control non standard three phase voltages by using an optional auxiliary supply input


  • Current range from 16 to 80 amps, voltage range from 100 to 500 volts.
  • Four digit display and single push button, simplify Operating, Commissioning, Maintenance and Configuration.
  • Isolated Analogue retransmission of power.
  • Configurable Alarm Relay

T2750 PAC Hardware

The Foxboro PAC system provides high-performance control with cost-effective redundancy options in a versatile modular system. Powerful instruments, the control units, and the I/O system form the basis of a complete distributed control and recording environment. This environment is capable of continuous, analog, logic, sequential control, batch management, secure data recording at point of measurement, and setpoint programming.
Combined with its powerful array of specialized features, it is designed to maximize your ROI, and ensure the maximum availability of your process. In addition to this, the Foxboro PAC is fitted with E-Sync technology (Invensys’ easy synchronization functionality), offering redundant processors and networking at the touch of a button – it couldn’t be simpler.
Key Benefits

    • High Performance Controller
    • Historian “Store & Forware”
    • High Integrity data recording
    • Redundancy
    • Integration
    • Multi-Setpoint Programmer
    • Enterprise Control System


T2550 Programmable Automation Controller – The Most Affordable, High Availability PAC

The T2550 PAC is a high performance solution offering extremely cost effective redundancy options – making high availability viable for more of your process. The control unit and I/O system form the basis of a complete distributed control and recording environment capable of continuous analog, logic and sequential control combined with secure data recording at point of measurement – all designed to maximize Return on Investment (ROI) from your process. Cost effective controller redundancy – automatic commissioning, bumpless changeover, redundant communications Power supplies – redundant system supply High system availability – redundant CPUs with automatic takeover Online reconfiguration Redundant Data logging Hot swap I/O Alarm monitoring Signal conditioning IEC 61131 programming Advanced PID control Technology so powerful and simple

T640 Integrated Loop Processor

The T640 is in itself a range of controllers. In its simplest form, the controller is supplied with a suite of pre-configured, documented, single and dual loop control structures which only require parametrization. In its most advanced form, it is a multi-purpose four loop controller configured for continuous control using a powerful set of function blocks supported by SFC for applications requiring sequential or state dependent control. Micro DCS configurable controller Multiple network support High speed peer-to-peer communications RS422 option supporting Bisynch(binary) protocol and Modbus SFC/GRAFCET to IEC61131-3 Upto four loops IP65 panel mounting seal Multi-language support

T2750 PAC Hardware

The Seriea AP In-Situ Carbon Sensor is a direct and continuous carbon potential sensor. It provides measurement accuracy of .05% of carbon over the temperature range of the sensor. Its unique patented design features a cylinder of special zirconium oxide formulation, welded into the end of an alumina tube by means of an eutectic welding process. The resultant homogenous structure provides the most rugged element design. The superstructure is of high temperature special alloy with a flow through tip design which minimizes soot collection. Internal connections are protected by a high quality connecting head. External connections are made with a quick disconnect four pin plug.

The probe can measure very low oxygen partial pressures with extreme accuracy and repeatability. It will control furnace atmospheres and generator gas supplies over the full range of carburizing hardening applications.

The furnace can be raised to operating conditions more rapidly and better control maintained after loading, resulting in economical energy savings. The carburizing gas supply is used more efficiently, resulting in increased savings. Furnace burnout of carbon deposits is either reduced or eliminated. Leakage of furnace seals or firing tubes is easily detected to make repairs and improve furnace efficiency.


The Series AP Probe does not require frequent maintenance and cleaning. When cool, it can be cleaned with a soft brush. No calibration is required. The only part subject to wear is the outer electrode which can be renewed at the factory. A special purge fitting allows soot burn-off in the furnace.

Air Reference Panel for Oxygen Sensors and Carbon Probes

The A-13893 Series of air supplies is designed to provide reference and purge air for the AP Series of Carbon and O2 Probes. All models use a rugged double-diaphragm pump designed for an industrial environment. The flow gauges have two-inch scales for readability and easy adjustment. A replaceable filter prevents particulate infiltration of the supply lines.

Models are available with a complete housing for surface mounting or with a front panel only for installation into a control panel. All versions are 50/60 Hz at 28 Watts.